1_DI ASTM Specifications
以下为《1_DI ASTM Specifications》的无排版文字预览，完整内容请下载
Development Interface Specification (DIS) for Data Innovations Standard ASTM LIS Document ID: DIS_0006 Last Updated: July 10th,2006 Version 2.1 Prepared by Adam Lamore Data Innovations, Inc. © COPYRIGHT 2006 DATA INNOVATIONS, INC. ® 120 Kimball Avenue, Suite 100 South Burlington, Vermont 05403 Office: (802) 658-2850 Customer Support: (802) 658-1955 Support Email: support@datainnovations.com The contents of this manual are subject to change without notice and shall not be regarded as warranty. Development Interface Specification (DIS) for Data Innovations Standard ASTM LIS Table of Contents Table of Contents ........................................................................................................................... i Revision History ............................................................................................................................ ii 1. Introduction..............................................................................................................................1 1.1 Purpose ........................................................................................................................................ 1 1.2 Definitions, Acronyms and Abbreviations .................................................................................. 1 1.3 Scope ........................................................................................................................................... 1 1.4 References ................................................................................................................................... 1 2. Overall Description..................................................................................................................2 2.1 Low-Level Protocol..................................................................................................................... 2 2.2 Message Hierarchy ...................................................................................................................... 2 2.3 Message Segment Structure......................................................................................................... 3 2.3.1 Message Header Record (H) ................................................................................................... 4 2.3.2 Patient Information Record (P) ............................................................................................... 5 2.3.3 Test Order Record (O)............................................................................................................. 6 2.3.4 Test Result Record (R)............................................................................................................ 7 2.3.5 Comment Record (C) .............................................................................................................. 8 2.3.6 Terminator Record (L) ............................................................................................................ 9 2.3.7 Communication Examples .................................................................................................... 10 3. External Interface Requirements .........................................................................................10 3.1 Hardware Interfaces................................................................................................................... 10 3.2 Software Interfaces .................................................................................................................... 11 4. Other Nonfunctional Requirements.....................................................................................11 4.1 Performance Requirements........................................................................................................ 11 4.2 Safety Requirements.................................................................................................................. 11 4.3 Security Requirements............................................................................................................... 11 5. Other Requirements ..............................................................................................................11 6. Approval Signatures ..............................................................................................................11 Document ID: DIS_0006 v2.1 Page i Development Interface Specification (DIS) for Data Innovations Standard ASTM LIS Revision History Name Adam Lamore Adam Lamore Adam Lamore Adam Lamore Adam Lamore Adam Lamore Date Apr 19, 2006 Apr 20, 2006 Apr 20, 2006 Apr 24, 2006 May 8, 2006 July 10, 2006 Reason For Changes Version Original 2.3.4 Added Result D/T to OUTbound 2.3.4 Added Test Units to OUTbound 2.3.4 Added Reference range to OUTBound 2.3.7.2 Updated Example Approved 2.2 Added comments to Patient and Sample 2.3.1 Removed ‘D’ - Debug as valid value 2.3.2 Changed ‘Attending Phys’ to ‘Ordering Phys’ 2.3.3 Field 8 is now ‘-‘ for OUT 2.3.2 Added Patient Race Field 2.3.7.1 Updated with Patient Race value 2.3.7.2 Updated with Patient Race value Approved v1.0 Draft v1.1 Draft v1.1 v2.0 Draft v2.1 Draft v2.1 Document ID: DIS_0006 v2.1 Page ii Development Interface Specification (DIS) for Data Innovations Standard ASTM LIS 1. Introduction 1.1 Purpose This document contains the Development Interface Specifications for the Data Innovations Standard ASTM LIS which are based on ASTM E 1381-91 standards. In addition to the ASTM Standard, this document also has requirements that relate to the DII ASTM LIS Interface processing of messages. 1.2 Definitions, Acronyms and Abbreviations ASTM IM DII American Society for Testing and Materials Instrument Manager by Data Innovations, Inc. Data Innovations, Inc. 1.3 Scope The Data Innovations Standard ASTM LIS interface a bi-directional interface that uses the standard Instrument Manager programming API for integration with the Instrument Manager application. The interface will use the standard Instrument Manager I/O module that allows for the following communications methods: RS-232 serial TCP/IP LAT 1.4 References ASTM E 1381-91 Document ID: DIS_0006 v2.1 Page 1 Development Interface Specification (DIS) for Data Innovations Standard ASTM LIS 2. Overall Description 2.1 Low-Level Protocol The ASTM messages are enclosed by control characters in order to form a block. The format is: • ddddCS • = Start of Text; ASCII 2dec • dddd = The transmitted data; a variable number of bytes • = End Transmission Block, ASCII 23dec • = End of Text; ASCII 3dec • = End of Transmission Block ASCII 4dec, • = Carriage Return; ASCII 13dec. • = Line Feed, ASCII 10dec. • = ASCII 6dec. • = ASCII 21dec. • CS = 2 character checksum 2.2 Message Hierarchy For various information flows various combinations of segments are relevant. Brackets, [ ], indicate segments that are optional. Braces, {}, indicate segments that may be repeated. Laboratory Order Message H {P} {O} [{R}] L Message Header Record Patient Information Record Test Order Record Previous Result Record Terminator Record Laboratory Result Message H P [{C}] O [{C}] {R} [{C}] L Message Header Record Patient Information Record Comment Record Test Order Record Comment Record Result Record Comment Record Terminator Record Document ID: DIS_0006 v2.1 Page 2 Development Interface Specification (DIS) for Data Innovations Standard ASTM LIS 2.3 Message Segment Structure This section describes all of the message segments used by the Data Innovations Standard ASTM LIS interface. Only these segments may be used to communicate relevant data to the Data Innovations Standard ASTM LIS. Description of Segment Tables SEQ Ordinal position of field/component within the segment. For example, if SEQ was "2", then the data would be in field 2, if SEQ was "4.1", then the data would be in field 4, component 1. IN IN - Messages co 内容过长，仅展示头部和尾部部分文字预览，全文请查看图片预览。 pecification (DIS) for Data Innovations Standard ASTM LIS 3.2 Software Interfaces None. 4. Other Nonfunctional Requirements 4.1 Performance Requirements None. 4.2 Safety Requirements None. 4.3 Security Requirements None. 5. Other Requirements None. 6. Approval Signatures Signatures required for approval of specification: Role Signature Date Development Manager Don Jarvis Quality Assurance Engineer Dave Delang Author Adam Lamore Requester DINA Document ID: DIS_0006 v2.1 Page 11 [文章尾部最后500字内容到此结束,中间部分内容请查看底下的图片预览]请点击下方选择您需要的文档下载。
- 2月13日作业
- 补全对话常用句子
- 全国硕士研究生入学统一考试英语试题
- 译文_测温人脸识别说明书
- 雅思听力 807 单词升级版单某某
- 财政预算计算
- 大学英语期末考试写作必背范文
- 3.电信行业全球概览总结-扁平简约
- 英语建议信修改
- 教学设计课题NewZealand
- 自考英语二自学教程(2012版)纯答案
- Challenge to All演讲稿
- 四级词汇摘抄
- 1_DI ASTM Specifications
- 英语小作文模板
以上为《1_DI ASTM Specifications》的无排版文字预览，完整内容请下载
1_DI ASTM Specifications由用户“cjj_0003”分享发布，转载请注明出处